Built-In Fall

Built-In Fall

At Creative Drain Solutions we manufacture our drains with built -in fall. The built-in fall can be to either end i.e. left or right (when viewed from outside the shower looking in) and ensures the water exits the drain and does not sit and stagnate in the drain. The outlet is installed 75mm to the centre, from the end and is normally a 50mm screwed outlet for connection to a “P” or “S” trap.

If our standard built-in fall doesn't suit your needs, we will manufacture a non-standard drain tray and locate the waste outlet in the centre, or other specified location.  The manufacture of non-standard drain trays will incur additional costs. Built-in fall in the lineal drain also makes installation easier.