Advantage Tile to Tile

The Advantage Tile to Tile Lineal Drain is a stainless steel grated drain which is installed at the front of the shower, between the two side walls of the showerhttp://cds.local//bathroom with floor tiles on either side of the lineal drain.

The Advantage Tile to Tile

The standard features of the Advantage Tile to Tile Lineal Drain include:

  • Drain tray with built-in fall, either left or right
  • Easy to install and waterproof
  • Standard 50mm male threaded waste located 75mm to centre from end of drain;
  • Manufactured from 316 (marine) grade stainless steel;
  • Drain is electro-polished to prevent tea-staining;
  • 50+mm flashings on horizontal surfaces, which meet or exceed Australian Standards for flashing on horizontal surfaces;
  • Weep slots in the horizontal flashing tile lip to allow any water which escapes past the tile seals to drain back into the drain channel and not build up under tiles, causing water damage.
  • Available in a brushed finish.

     

    The custom features of the Advantage Tile to Tile Lineal Drain include:

    • Manufactured to suit the specific tile thickness on floor and walls;
    • Drain length is manufactured to your specification;
    • Outlet location can be located to suit your requirements;
    • Outlet can be changed to be a stainless steel dropper, size to suit.


       

      This drain can be made to custom lengths depending on your requirements.

      Available in Left or Right Fall. Standard waste is 75mm to centre from end of drain.

      This drain is available in either brushed or polished finishes.