Advantage Balcony Tile to Tile

The Advantage Balcony Tile to Tile is a stainless-steel grated drain which is designed for outdoor balconies and is installed with tiles on both sides of the lineal drain. In most installations, this drain would run from end to end of the balcony and will be located near the outer edge of the balcony.

Styles:

7 Bar Grate
Tile Insert Tray
Height Adjustable Tile Insert Tray
Punched Slot

Features:

Easy to install
Weep holes to eliminate water hydration from under the tile
Fixing points provided
Incorporated waterproof flanges
Fully customisable to the required length, depth and your tile thickness

Optional Extras:

Additional droppers
Outlet locations greater than 100mm from an end
Multi-direction fall
Powdercoating
Mitred corners
Curved drains to any radius or width required

Included as standard:

Custom lengths
Built-in fall to left or right
Exclusively made from 316 Brushed Marine Grade Stainless Steel
Passivated and Electro-polished to prevent tea staining
Welded end caps
Manufactured to suit your tile thickness
Single dropper of your choice within 75-100mm from an end
Weep slots in horizontal flashing to discharge any water under the tiles
50+mm built-in stainless steel flashing on horizontal surfaces to meet and or exceed Australian Standards for flashing on horizontal surfaces
All Tile Insert linear drains are delivered with a suction cup to aid the removal of the tile insert tray. Please Note: The suction cup should only be used to lift the tile insert tray at one end, allowing the tray to be grasped by hand and carefully lifted out. The suction cup is unlikely to work on porous stone or tile surfaces such as bluestone or marble

Contact Us

Online Enquiry

Advantage Balcony Tile to Tile

Styles:

Features:

Optional Extras:

Included as standard:

Enquire Now